Don's Reproduction Japanese Militaria Parts List
1. Lanyard assembly, (stud, securing ring, lanyard ring
and screw)-------------------------------------------------------------$ 75.00 ea.
2. Main spring------------------------------------------------------------$ 40.00 ea.
3. Hammer rebound lever-------------------------------------------------$ 40.00 ea.
4. Cleaning rod, polished steel --------------------------------------------$ 30.00 ea.
5. Hammer/sear bar V spring----------------------------------------------$ 10.00 ea.
6. Grip screws ------------------------------------------------------------$ 5.00 ea.
7. Side plate hinge screw--------------------------------------------------$10.00 ea.
Nambu Automatic Pistol Type A (Grandpa):
1. Firing pin---------------------------------------------------------------$ 35.00 ea.
2. Magazine release (body, button, and spring)----------------------------$ 85.00 ea.
3. Magazine follower -----------------------------------------------------$ 40.00 ea.
4. Magazine follower button ----------------------------------------------$ 25.00 ea.
5. Cleaning rod, nickel plated---------------------------------------------$ 25.00 ea.
Modified 1902 Type Nambu (Papa):
1. Grip screw-------------------------------------------------------------$ 10.00 ea.
2. Trigger and grip safety spring-------------------------------------------$ 15.00 ea.
3. Grip safety-------------------------------------------------------------$ 85.00 ea.
4. Safety pivot pin--------------------------------------------------------$ 5.00 ea.
5. Firing pin---------------------------------------------------------------$ 35.00 ea.
6. Magazine release (body, button, and spring)----------------------------$ 85.00 ea.
7. Extractor---------------------------------------------------------------$ 50.00 ea.
8. Aluminum magazine bottom---------------------------------------------$ 40.00 ea.
9. Bolt lock and striker guide, original style checkering---------------------$ 85.00 ea.
10. Magazine follower button, nickeled-------------------------------------$ 25.00 ea.
11. Cleaning rod, nickel plated---------------------------------------------$ 25.00 ea
Nambu automatic pistol Type B (Baby):
1. Grip screws-------------------------------------------------------------$ 10.00 ea.
2. Trigger and safety flat spring---------------------------------------------$ 15.00 ea.
3. Safety pivot pin----------------------------------------------------------$ 5.00 ea.
4. Firing pin----------------------------------------------------------------$ 35.00 ea.
5. Magazine release (body, button, and spring) -----------------------------$ 85.00 ea.
6. Extractor, if you send me the bolt, fitting is no charge---------------------$ 50.00 ea.
7. Bolt lock and striker guide, original style checkering----------------------$ 85.00 ea.
8. Cleaning rod, nickel plated-----------------------------------------------$ 25.00 ea.
T-14 Nambu:
1. Grip screw--------------------------------------------------------------$ 10.00 ea.
2. Firing pin, all types, need to know arsenal and date----------------------$ 30.00 ea.
3. Firing pin followers, all types, same as above----------------------------$ 25.00 ea.
4. Sear bar----------------------------------------------------------------$ 30.00 ea.
5. Sear pivot pin, two types -----------------------------------------------$ 10.00 ea.
6. Magazine safety button and spring set-----------------------------------$ 10.00 ea.
7. Extractor ---------------------------------------------------------------$ 40.00 ea.
8. Cocking knobs, two type ----------------------------------------------$ 30.00 ea.
9. Cleaning rods
Blued-------------------------------------------------------------$ 20.00 ea.
Nickel plated-----------------------------------------------------$ 25.00 ea.
10. Retip firing pins: this includes; Grandpa, Papa & Baby------------------$ 25.00 ea.
11. Safety, Blued --------------------------------------------------------- $ 40.00 ea.
Strawed-------------------------------------------------------$ 45.00 ea.
12. Magazine release spring------------------------------------------------$ 5.00 ea.
13. Magazine retention spring----------------------------------------------$ 25.00 ea.
14. Magazine retention spring rivet set, 2 rivets ----------------------------$ 15.00 ea.
15. Magazine follower button
Blued----------------------------------------------$ 25.00 ea.
Nickeled-------------------------------------------$ 30.00 ea.
16. Lanyard ring-----------------------------------------------------------$ 15.00 ea
T-94 Nambu:
1. Grip screw -----------------------------------------------------------$ 10.00 ea.
2. Barrel bushing ---------------------------------------------------------$ 10.00 ea.
3. Firing pin --------------------------------------------------------------$ 30.00 ea.
4. Firing pin spring--------------------------------------------------------$ 8.00 ea.
5. Bolt pin ----------------------------------------------------------------$ 15.00 ea.
6. Lanyard ring -----------------------------------------------------------$ 15.00 ea.
7. Extractor --------------------------------------------------------------$ 40.00 ea.
8. Magazine buttons: two types -------------------------------------------$ 15.00 ea.
9. Cleaning rods:
Blued-------------------------------------------------------------$ 15.00 ea.
Nickel plated------------------------------------------------------$ 25.00 ea.
10. Safety, blued or strawed----------------------------------------------$ 40.00 ea
T-90 2 and 3 barrel flare pistol:
1. Frame screw------------------------------------------------------------$ 10.00 ea.
2. Grip screw--------------------------------------------------------------$ 10.00 ea.
3. Barrel pivot screw-------------------------------------------------------$ 10.00 ea.
4. 3- barrel cocking knob---------------------------------------------------$ 50.00 ea.
5. 3- barrel cocking knob screw--------------------------------------------$ 15.00 ea.
6. 3-barrel cocking knob spring---------------------------------------------$ 10.00 ea.
7. 3 barrel cocking knob securing pins (2)-----------------------------------$ 5.00 ea.
T-10 Flare pistol:
1. Main spring, same as the T-26 revolver-----------------------------------$ 35.00 ea.
2. Grip screw---------------------------------------------------------------$ 10.00 ea.
3. Other frame screws------------------------------------------------------$ 10.00 ea.
4. Barrel flat spring----------------------------------------------------------$ 15.00 ea.
T-13 Murata rifle:
1. Firing pin spring------------------------------------------------------------$ 50.00 ea.
2. Bolt securing block---------------------------------------------------------$ 25.00 ea.
3. Bolt securing block screw--------------------------------------------------$ 15.00 ea.
4. Cleaning rod; see cleaning rod listing below.
T-18 Murata rifle and carbine:
1. Firing pin spring------------------------------------------------------------$ 50.00 ea.
2. Bolt retaining screw--------------------------------------------------------$ 20.00 ea.
3. Tang screw----------------------------------------------------------------$ 15.00 ea.
4. Trigger guard screw--------------------------------------------------------$ 15.00 ea.
5. Front trigger guard screw---------------------------------------------------$ 5.00 ea.
6. Extractor-------------------------------------------------------------------$ 75.00 ea.
7. Cleaning rod: see cleaning rod list below.
T-22 Murata carbine:
1. Bolt head, complete--------------------------------------------------------$ 250.00 ea.
2. Trigger spring---------------------------------------------------------------$ 30.00 ea.
3. Trigger guard screws: front, middle, rear------------------------------------$ 10.00 ea.
4. Ejector---------------------------------------------------------------------$ 40.00 ea.
5. Extractor-------------------------------------------------------------------$ 50.00 ea.
6. Magazine tube follower------------------------------------------------------$ 30.00 ea.
7. Magazine tube brass front end cap-------------------------------------------$ 30.00 ea.
8. Magazine tube spring --------------------------------------------------------$ 25.00 ea.
T-22 Murata rifle:
1. Bolt head, complete---------------------------------------------------------$250.00 ea.
2. Bolt head retainer-----------------------------------------------------------$ 50.00 ea.
3. Bolt head retainer screw-----------------------------------------------------$ 15.00 ea.
4. Ejector----------------------------------------------------------------------$ 40.00 ea.
5. Extractor--------------------------------------------------------------------$ 50.00 ea.
6. Magazine tube follower------------------------------------------------------$ 30.00 ea.
7. Magazine tube brass front tube cap------------------------------------------$ 30.00 ea.
8. Magazine tube spring--------------------------------------------------------$ 25.00 ea.
T-30 Rifle and Carbine:
1. Trigger guard screws: front, middle------------------------------------------$ 10.00 ea.
2. Tang screw-----------------------------------------------------------------$ 10.00 ea.
3. Extractor--------------------------------------------------------------------$ 50.00 ea.
4. Ejector----------------------------------------------------------------------$ 50.00 ea.
5. Bolt head--------------------------------------------------------------------$ 75.00 ea.
6. Bolt screw locking spring----------------------------------------------------$ 30.00 ea.
7. Cleaning rod: see cleaning rod listing.
T-35 Rifle:
1.Trigger guard screws: front & middle-----------------------------------------$ 10.00 ea.
2. Tang screw------------------------------------------------------------------$ 10.00 ea.
3. Ejector----------------------------------------------------------------------$ 75.00 ea.
4. Extractor--------------------------------------------------------------------$ 75.00 ea.
5. Cleaning rod: see cleaning rod list.
T-44 Carbine:
1. Bayonet housing screws, state which model 1st, 2nd, or 3rd---------------$ 15.00 ea.
2. Trigger guard screws-----------------------------------------------------$ 10.00 ea.
3. Bayonet housing stacking hook assembly ---------------------------------$ 75.00 ea.
4. Cleaning rod: see cleaning rod listing below
T-38 Rifle:
1. Trigger guard screws: front, middle----------------------------------------$ 10.00 ea.
2. Tang screw---------------------------------------------------------------$ 10.00 ea.
3. Cleaning rod: see cleaning rod listing.
T-38 Carbine:
1. Trigger guard screws: front, middle, rear----------------------------------$ 10.00 ea.
2. Rear barrel band---------------------------------------------------------$ 50.00 ea.
3. Cleaning rod: see cleaning rod listing below
T-1 Folding stock carbine
1. Latch---------------------------------------------------------------------$ 30.00 ea.
2. Rear hinge screw with spanner nut----------------------------------------$ 25.00 ea.
3. Front hinge screw with wing nut wing nut stop and screw----------------- $ 50.00 ea.
4. Latch disengagement spring ----------------------------------------------$ 25.00 ea.
T- 99 Long rifle:
1. Front and rear band screw----------------------------------------------$ 10.00 ea.
2. Rear sight wing---------------------------------------------------------$ 10.00 ea.
3. Rear sight wing screws--------------------------------------------------$ 5.00 ea.
4. Trigger guard screws----------------------------------------------------$ 10.00 ea.
5. Monopod bolt, nut and assembly----------------------------------------$ 15.00 ea.
6. Monopod springs, per set-----------------------------------------------$ 20.00 ea.
7. Monopod block and pivot pin-------------------------------------------$ 25.00 ea.
8. Monopod wire----------------------------------------------------------$ 25.00 ea.
9. Complete monopod assembly, #5,6,7&8--------------------------------$ 70.00 ea.
10. Cleaning rod: see cleaning rod listing below.
T-99 Short rifle:
1. Front and rear band screws---------------------------------------------$ 10.00 ea.
2. Rear sight wing, right or left ---------------------------------------------$ 10.00 ea.
3. Rear sight wing screw---------------------------------------------------$ 5.00 ea.
3. Trigger guard screws, 3, front, middle and rear--------------------------$ 10.00 ea.
4. Monopod bolt, nut assembly--------------------------------------------$ 15.00 ea.
5. Monopod spring--------------------------------------------------------$ 25.00 ea.
6. Monopod block and pivot pin------------------------------------------$ 25.00 ea.
7. Monopod wire---------------------------------------------------------$ 25.00 ea.
8. Complete monopod assembly, # 4,5,6&7------------------------------$ 70.00 ea.
9. Cleaning rod retention stud, for late screw in rods-----------------------$ 15.00 ea.
10 Cleaning rod: see cleaning rod listing below.
T-99 Sniper rifle:
1. Bolt, body only:
I supply the bolt body, no extractor, f/p or safety------------------$ 70.00 ea.
You supply the bolt body------------------------------------------$ 50.00 ea.
2. Scope mount block-----------------------------------------------------$100.00 ea.
3. Scope mount block screw (4)-------------------------------------------$ 10.00 ea.
4. Scope mount block register pins(2)------------------------------------- $ 5.00 ea.
5. Flat, scope retaining spring----------------------------------------------$ 50.00 ea.
6. Flat, scope retention spring screw---------------------------------------$ 10.00 ea.
7. Barrel band and trigger guard screws------------------------------------$ 10.00 ea.
8. 4 power nonadjustable scope, rear knurled eye piece ring ---------------$ 70.00 ea.
9. Cleaning rod: see cleaning rod listing below.
T-99 Special Naval Rifle:
1. Trigger guard screws; front, middle and rear------------------------------$ 10.00 ea.
2. Rear band screw---------------------------------------------------------$ 10.00 ea.
3. Cleaning rod; see cleaning rod listing below-------------------------------$ 15.00 ea.
T-97 Sniper rifle:
1. Bolt, body only:
I supply the bolt body, no extractor, f/p or safety------------------$ 70.00 ea.
You supply the bolt body------------------------------------------$ 50.00 ea
2. Scope mount block----------------------------------------------------$100.00 ea.
3. Scope mount block screws---------------------------------------------$ 10.00 ea.
4. Flat scope retaining spring----------------------------------------------$ 50.00 ea.
5. Flat scope retaining spring screw---------------------------------------$ 10.00 ea.
6. Trigger guard screws---------------------------------------------------$ 10.00 ea.
7. 2X power scope, rear knurled eye piece ring---------------------------$ 70.00 ea.
8. 2.5 power scope locking lever assembly--------------------------------$200.00 ea.
9. Rear barrel band, Kokura----------------------------------------------$ 75.00 ea.
10. Monopod assembly, Nagoya only, -----------------------------------$ 70.00 ea.
11. Cleaning rod: see cleaning rod listing below.
T-2 Paratroop rifle:
1. Front and rear barrel band screws--------------------------------------$ 10.00 ea.
2. Front junction band long screws----------------------------------------$ 10.00 ea.
3. Rear junction band short screws----------------------------------------$ 10.00 ea.
4. Barrel retention wedge block assembly----------------------------------$ 75.00 ea.
5. Wedge block retention screw-------------------------------------------$ 10.00 ea.
6. Wedge D ring----------------------------------------------------------$ 15.00 ea.
7. Wedge retention nut ---------------------------------------------------$ 25.00 ea.
8. Cleaning rod: see cleaning rod listing below.
T-13/18 Murata rifle and T-18 carbine-----------------------------------$ 30.00 ea.
T-38 Long, short, carbine and T-1 carbine-------------------------------$ 25.00 ea.
T-44 Section------------------------------------------------------------$ 25.00 ea.
T-99 4 7/8": 5th series, 24th series, or 34th series -----------------------$ 15.00 ea.
T-99 Late: 23rd-early 24th series 5 ¾” rod-------------------------------$ 20.00 ea.
T-99 Short rifle: 23 ¾”---------------------------------------------------$ 25.00 ea.
T-99 Long rifle: 29 3/16”-------------------------------------------------$ 25.00 ea.
T-2 Paratrooper: 21 5/16”------------------------------------------------$ 25.00 ea.
T-I Italian made rifle: 6.5 mm--------------------------------------------$ 25.00 ea.
7/8” Childs trainer---------------------------------------------------------$ 20.00 ea.
T-99 Shibata trainer-------------------------------------------------------$ 20.00 ea.
Mexican Arisaka: Rifle or carbine------------------------------------------$ 30.00 ea.
Naval Special T-99: short rod---------------------------------------------$ 15.00 ea.
Japanese VZ24 -----------------------------------------------------------$ 25.00 ea.
Trainer cleaning rod: 4 ½”, pointed end, drive in---------------------------$ 15.00 ea.
T-46 /1903 Siamese Mauser ---------------------------------------------$ 25.00 ea.
T-66 Siamese (T-38 copy)------------------------------------------------$ 30.00 ea.
T-47 Siamese carbine rod 15 7/8”----------------------------------------$ 30.00 ea.
T-38, 6.5 mm Rifle squad cleaning kit components:
1. Steel brush protector --------------------------------------------------$ 15.00 ea.
2. Folding screwdriver: (a multi-purpose screwdriver
that also fits in the T10 flare pistol holster, rifle
squad cleaning kits and 96/99 LMG cleaning kits)----------------------$ 35.00 ea.
3. Cleaning rod sections --------------------------------------------------$ 25.00 ea.
4. Brass rotating jag tip----------------------------------------------------$ 25.00 ea.
T-99, 7.7 mm Rifle squad cleaning kit components:
1. Cleaning rod sections---------------------------------------------------$ 25.00 ea.
2. Brush protector---------------------------------------------------------$ 15.00 ea.
3. Folding screwdriver; (a multi-purpose screwdriver
that also fits in the T10 flare pistol holster, the rifle
squad cleaning kits and the 96/99 LMG cleaning kits--------------------$ 35.00 ea.
T-96, 6.5 mm Light machine gun cleaning kit components:
1. Folding screwdriver-----------------------------------------------------$ 35.00 ea.
2. Tweezers/tongs (approx. 6" long)----------------------------------------$ 25.00 ea.
3. Tapered punch----------------------------------------------------------$ 20.00 ea.
4. Gas cylinder carbon scraper---------------------------------------------$ 25.00 ea.
5. Cleaning rod, threaded on 2 ends, one end is for the
Scraper----------------------------------------------------------------$ 30.00 ea.
6. Brass or aluminum Hammer---------------------------------------------$ 30.00 ea.
7. Broken case extractor---------------------------------------------------$ 75.00 ea.
T-99, 7.7 mm Light machine gun cleaning kit components etc:
1. Folding screw driver-----------------------------------------------------$ 35.00 ea.
2. Taper punch-------------------------------------------------------------$ 20.00 ea.
3. Gas cylinder carbon scraper---------------------------------------------$ 25.00 ea.
Miscellaneous:
T-100 Grenade Launcher retaining pin and ring, state which model------------------------$ 40.00 ea.
T-100 Grenade Launcher split bushing, state T-38 or T-99-------------------------------$ 30.00 ea.
T-100 Grenade Launcher bushing spring--------------------------------------------------$ 30.00 ea.
T-100 Grenade Launcher bushing and spring assembly------------------------------------$ 70.00 ea.
T-100 Grenade Launcher chain, hand made-----------------------------------------------$ 40.00 ea.
T-100 Grenade Launcher triangular chain securing ring------------------------------------$ 15.00 ea.
T-100 Grenade Launcher complete attachment assembly---------------------------------$130.00 ea
T-100 Grenade Launcher bullet tube-----------------------------------------------------$ 35.00 ea.
T-2 Grenade launcher securing handle and stop washer-------------------------------$ 75.00 ea.
Aluminum handled NCO shin-gunto sword tassel ring------------------------------------$ 15.00 ea.
Wood handle NCO sword, screw and tapered nut---------------------------------------$ 20.00 ea.
T-95 NCO sword throat securing screw-------------------------------------------------$ 10.00 ea.
Type 32 Army/Cavalry sword grip screw and tapered nut set-----------------------------$ 25.00 ea
Model 1879 German Reichsrevolver cylinder axis pin retaining lever-----------------------$ 75.00 ea.
German, Deutsches Sportmodell .22 rifle (DSM 34), stacking rod--------------------------$ 25.00 ea.
German, Deutsches Sportmodell .22 rifle (DSM 34) bolt release screw--------------------$ 10.00 ea.
Mle. 1873 11 mm French revolver lanyard ring assembly----------------------------------$ 50.00 ea.
T-30 bayonet screws----------------------------------------------------------------------$ 10.00 ea.
T-30 bayonet grip screw washers----------------------------------------------------------$ 10.00 ea.
T-89 Knee Mortar adjusting knob; knurled knob, shaft and securing nut--------------------$ 80.00 ea.
T-89 Knee Mortar adjusting gear-----------------------------------------------------------$ 40.00 ea.
T-91 and 97 grenade top, painted black and red--------------------------------------------$ 30.00 ea.
T-91 and 97 grenade, brass block and firing pin assembly-----------------------------------$ 15.00 ea.
T-91 and 97 grenade, brass cover----------------------------------------------------------$ 25.00 ea.
T-91 and 97 grenade, fuse safety pin--------------------------------------------------------$ 8.00 ea.
T-91 and 97 grenade, external brass firing pin tube -----------------------------------------$ 25.00 ea.
T-91 and 97 grenade firing pin spring-------------------------------------------------------$ 8.00 ea.
T-91 and 97 grenade, complete fuse train assembly, all the above parts---------------------$ 55.00 ea.
T-91 Grenade booster charge assembly-----------------------------------------------------$ 40.00 ea.
T-99 Kiska grenade brass cover------------------------------------------------------------$ 20.00 ea.
T-99 Kiska grenade steel gas deflection cup-------------------------------------------------$ 20.00 ea.
T-99 Kiska grenade fuse safety pin----------------------------------------------------------$ 8.00 ea.
T-99 4 power adjustable scope, rear knurled eye piece ring---------------------------------$ 75.00 ea.
T-99 4 power adjustable scope adjusting screws--------------------------------------------$ 20.00 ea.
T-99 4 power adjustable scope adjusting screw cap-----------------------------------------$ 50.00 ea.
Brass sling buckle for the 1 1/8” leather sling-------------------------------------------------$ 25.00 ea.
Retip rifle firing pins--------------------------------------------------------------------------$ 25.00 ea
I may be able to make other parts not listed. Most of the parts above were requests at one time. All the parts above are REPRODUCTIONS. Please let me know what your needs are. All my parts are marked with a prick punch mark and a small R to denote they are reproductions. I will not serial number the parts to the guns. Postage is not included. Thank you,
Don Schlickman
(as of March 29, 2012)