<< previous page | next page >>
50: Drawbar and wheel cover parts
 51: Drawbar and wheel covers in place
 52: Parts for feedwater connection
 53: water connections in place
 54: air connection in place
 55: house bracket edges
 56: house brackets finished
 57: boiler parts
 58: wagon top formers
 59: finished boiler before trimming
 60: running boards
 61: checking running boards for fit
 62: boiler on running boards
 63: weights in wagon top
 64: Public Archives Canada, C-11597
 65: model photo
 66: Archives of Ontario, 10328-7-19
 67: model photo
 68: overlay
 69: cab floor
 70: cab outer layer
 71: running boards
 72: smokebox wrapper
 73: cab pieces
 74: cab wall, end and subroof
 75: cab and roof
 76: finished cab and roof
 77: cylinder parts
 78: cylinder test fit
 79: cylinder trimmed
 80: saddle roughed in
 81: saddle front and back
 82: checking saddle fit
 83: fitting the rear flange
 84: flanges before trimming
 85: saddle fully detailed
 86: rechecking saddle fit
 87: steam dome roughed in and saddle finished
 88: saddle for sand dome
 90: sand dome, alignment jig and saddle
 91: sand dome filler: lots of sanding to go
 92: sand dome
 93: stack and domes in place
 94: domes removed
 95: sand line casings
 96: pilot frame
 97: jig for pilot slats
98: pilot slats in jig
 99: end beam and pilot deck parts
 100: pilot
 << previous page | next page >>