---

JET PUMPS

1/3 AND 1/2 HP SHALLOW WELL/DEEP WELL CONVERTIBLE Features All cast iron construction 115 / 230 switch on motor Heavy duty cast iron bracket, no square flange motor Lexon "GLASS-FILLED" impeller Shaft Seal with polished ceramic and carbon faces Two year warranty

---

SUBMERSIBLES

THE NEXT GENERATION Features and Benefits Predator's stainless steel exterior provides the maximum corrosion resistence Teflon reinforced polyester staging provides better heat deflection and lubrication allowing PREDATOR ST to better handle sand and grit - longer life Built-in non-rotating check valve - easier installation Franklin motors offer quality and dependability and overload protection against overheating Shaft Seal with polished ceramic and carbon faces Optional 5 year warranty

S SERIES 4 INCH SUBMERSIBLE WELL PUMPS Stainless Steel Construction 5, 10, 16, 25, 40 & 75 gpm 1/2 - 10 HP Internal built-in check valve Quality, sand handling SST staging Pressed & pinned shaft/coupling assembly Rugged suction screen

---

CONSTANT PRESSURE WATER SYSTEM

Features Premium efficiency Myers motor Precision balanced one piece stainless steel shaft/rotor assembly Dependable sand-resistant shaft seal Long-lasting, ultra-tough pump staging Internal non-spinning check valve Quality stainless steel bearing housing Motor leads exit through the patented stainless steel suction/discharge bowl, eliminating the need for a lead guard

---

QUALITY WELL-RITE PRESSURE TANKS

Features and Benefits 5 year warranty High grade butyl diaphragm delivers pure odour-free water Stainless steel connection - totally lead free Controlled action diaphragm - bulkhead dome prevents movement due to over pressurization...longer life High grade urethane finish-prevents rust

---

HEAVY DUTY SUMP PUMPS

1/4 HP SUBMERSIBLE PUMP

Features Recessed vortex impeller provides free flow of liquids & soils up to 1/4" 1 1/2" NPT DISCHARGE Cast iron motor housing Quick connect power & switch cord Head to 23 feet, capacity 28 gpm

1/3 HP SUBMERSIBLE SUMP & EFFLUENT PUMP

Features 1/3 hp for demanding drainage jobs Ideal for effluent pumping - recessed vortex impeller allows for 1/2" SOLIDS HANDLING Corrosion resistent cast iron construction Wide angle mechanical float switch for maximum drawdown Heads to 23 feet, 31 gpm capacity

---

SEWAGE PUMP AND BASIN EJECTOR SYSTEM

COMPLETE PACKAGE FOR VERSATILE APPLICATIONS

RESIDENTIAL SEPTIC TANK SEWAGE LARGE SUMPS HIGH QUALITY SYSTEM INCLUDES... Heavy duty 4/10 hp residential sewage pump...reliable Oil filled motor for maximum heat dissipation, continuous bearing lubrication Recessed vortex impeller provides free flow of liquids & solids up to 2" IN DIAMETER Thermal overload protection with auto reset Piggy-back mechanical float

---

SINGLE AND MULTI-STAGE CENTRIFUGAL PUMPS

CT SERIES

Features 1/2 to 2-1/2 HP Models High Head Capabilities to 140 feet Flow Capacities to 95 GPM Double Ball Bearing Motor Continuous Duty Rated Single Phase (115/230 Volt) Three Phase (208/230/460 Volt) Choice Of Impellers: Composite Impeller Rated to 140° F Brass Impeller Rated to 212° F Max Working Pressure of 125 PSI Choice of Complete Unit or Pump End Assembly

CENTRI-THRIFT

Features 2 to 7-1/2 HP Models High Head Capabilities to 140 feet Flow Capacities to 240 GPM Available with 1-1/4", 1-1/2" and 2" Discharge Sizes Can be Close-Coupled or Belt-Driven Choice of Complete Unit or Pump End Assembly

QUICK PRIME

Features Rugged Cast Iron Case and Motor Bracket Single and Three Phase NEMA Motors Available in 3/4 to 5 HP Reinforced Composite or Lead-Free Brass Impellers Max Head Capabilities of 178 feet Max Pressure of 77 PSI Max Flow Capacities to 140 GPM Choice of Complete Unit or Pump End Assembly

2C TWO STAGE

Features Heavy Duty, All Metal Construction Rugged Cast Iron Case, Motor Bracket and Internal Housings Stainless Steel Pump Shaft Available in 1, 1-1/2, and 2 HP Lead-Free Silicon Bronze Impellers Max Head Capabilities of 175 feet Max Temperatures of 160° F Max Flow Capacities to 47 GPM Long Life, Carbon-Ceramic Mechanical Shaft Seal Lapped and Polished Stainless Steel Construction Choice of Complete Unit or Pump End Assembly

12C TWO STAGE

Features Models Availabe with Rugged Cast Iron Impellers or Lead-Free Brass Impellers 60 Hz, Three Phase, 230/460 Volt Motors are Standard Available in 5 to 20 HP Max Head Capabilities of 400 feet Max Flow Capacities to 140 GPM 12C and 12Cl Have Threaded 2" Suction and 1-1/2" Discharge Max Temperatures of 220° F

MV MULTI-STAGE VERTICAL

---

---

---