Hoyt McKagen <batwings@i-plus.net> wrote

JJJ wrote:
>
> I'm interested in your cnc conversion

Not to jump in ahead of Peter here but he and I have had some
conversations and has indicated to me that my software was of interest
to him. If you liked his ideas you'll probably like mine. I use my
program on my conversion Maximat and it has been extremely helpful. It is
complete interface between operator and one of the best machine drivers
on market, Indexer LPT. I have in it many canned routines, file
generation, handling and run-back, all machine parameters configurable,
tool offsets table, auto-tool change, emergency tool change (can stop
and jog aside during programming or run-back, change and re-qualify tool;
the machine then goes back to the same place and line number and
continues), block recutting, etc. You can see some more features on my
BelFab site, URL in tagline.

If you're interested in making a conversion, I will be happy to try to
help. Ask me anything.

--

Warm regards,

Hoyt McKagen

Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
Best MC Repair - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Secret societies only isolate themselves