Maple Leaf Drilling Equipment

B-20 Cricket Rig

  A capable lightweight modular drill with 20hp load-sensing hydraulics.  It can be transported in small planes and boats and can drill with eight feet  headroom.  We have a variety of  skids with different widths, wheels, etc.

28" wide unit on skid
1100 lbs, 6 ft stroke,
7000 lbs pull back,
1000  lbs torque
auger, coring,  SPT

B20 CricketB20 Cricket

B-24 Mobile Rig

  Slightly larger than the B-20, this unit is usually on a road-travelling trailer, but also has a skid frame.

30-46  wide skid frame
16' 8" height on trailer
6 ft long
6 3 stroke
6200 lbs  pullback
1000 lbs torque
auger, coring, SPT

MobileB24

VL-60

  A specialized machine mounted on our 416 4x4 backhoe but can be mounted on other equipment that is available.  At only 1100 lbs, it is a very capable machine.  It is ideal  for ditches, banks, over fences or piping, in buildings, against buildings  or horizontally under buildings 0° - 90°

6  stroke
9000 lbs pullback
3500 lbs torque
works in 10' 3" ceiling height
auger, coring, SPT
VL60VL60

B-40

  A favorite for environmental drilling, coring and SPT, the B-40 is mounted on a single axle truck.

8' 2" wide
22 ft long, 25' 8: high
12 6 stroke
6000 lbs torque
15000 lbs pullback
B40

CT-250 Canterra

  A larger unit mounted on a tandem truck, ideal for deeper holes.  Used  for rotary water well drilling.  The 23 stroke makes solid and hollow stem augering quick and  efficient for deeper holes.

8' 6"  wide, 32 ft long, 33" 3' high
18000 lbs pullback
10000 lbs torque
23 stroke
CT-250

DR150 Deep Rock Auger Rig

  The DeepRock auger rig is mounted on an M-7 Bombardier, and is used for difficult access areas.

7' 4" wide, 13 ft long
12 stroke
11000 lbs pullback
5000 lbs torque
auger, mud rotary, coring, SPT
DR150

Hoist Truck

  Used for pulling submersible and lineshaft well pumps.  It has a lifting capacity of 4000 lbs single line and 8000 lbs double line.  This unit will easily install most pumps.  It is mounted on a 4x4 truck for better access.
Hoist Truck

Wash Unit

  A self-contained 7.5 KW generator, 200 gallon water tank, wash unit, hot water and low pressure steam for washing.  A wash tube and tank can be supplied for containing waste water.  Unit is completely winter weather protected.
Wash Unit
 

 

 

Drill Rig Canterra 250 Mobile B40 DR150 VL-60 B24 B20
Unit Weight (lbs) 44,000 22,000 13,000 13,000 + 1,100 1,700 + trailer 1,070 on skid
Retract Force (lbs) 18,000 15,000 11,000 9,000 6,200 7,000
Torque (ft-lbs) 10,000 6,000 5,000 3,500 1,000 1,000
Draw Works Travel (ft) 23 12½ 12½ 6 6
Clearance Height 33' 3" 25' 8" 20' / 28' 10' 3" 16' 8" on trailer 7'10" to 13'
Boulder Material Capable Rotary Rotary Rotary      
Angle Drilling Capable Yes Yes   90º - 0º Yes Yes
Half Masting Capable     2 Position   Yes Yes
Blow Count Capable (SPT) Yes Yes Yes Yes Yes Yes
Unit Width 8' 6" 8' 2" 7' 4" 30" - 13" 30" 28"
Unit Length 32' 22' 13' 25' 6' Skid 6' Skid
Rubber Tired Tandem Truck Single Truck   416 Backhoe Trailer Wheels, Skid
Unit on Tracks     Yes      
Balloon Tired       Yes    
Dismantleable       Rig Yes Yes Yes
Direct Push            
Largest Internal Hollow Stem Diameter (inches) 4¼, 2¼ 4¼, 2¼
Largest External Hollow Stem Diameter (inches) 9 9 9 9 9, 6½ 9, 6½
Auger Diameter (inches) 5" - 14" 5" - 14" 5" - 14" 5" 4", 5" 4"
Split Spoon Sizes (inches) 2 + 3" 2 + 3" 2 + 3" 2 + 3" 2 + 3" 2 + 3"
Coring Yes Yes Yes Yes Yes Yes