Amsoil Synthetic Lubricants    If you are searching for any of the following topics: 

   Order Direct at:         1-800-956-5695  
Use Customer Number        327600

AMSOIL Helps Take the Bite Out of Fuel Prices

Unstable gasoline and fuel prices in 2005 have riveted the nation’s attention. Crude oil prices rose to record highs during the summer, then climbed higher after the horror of hurricanes Katrina and Rita. US Energy Information Administration projected gasoline and diesel fuel prices would fall from record highs of more than $3 a gallon, yet remain high across the nation into 2006 and beyond.

“With as much as 5 percent of refinery capacity expected to remain shut down for months, it will take time for the gasoline supply system to return to normal, implying that prices could remain elevated (the U.S. average retail price was $2.93 per gallon during the first week of October) for some time to come. With significant volumes of refinery capacity expected to remain out for an extended period, consumers should not expect prices to decline quickly, since the disruption to supply is still occurring,” the EIA said in a mid-September report.

Consumers looking to reduce fuel costs should start with lubricants.

The “goal” of the engine and drivetrain is the maximum transfer of the energy released from fuel combustion to the wheels to move the vehicle.

The engine and drivetrain accomplish their goal mechanically. Each mechanical component has moving parts that require lubrication for friction, heat and wear control. Ironically, while parts move with significantly reduced friction when a lubricant separates them, the lubricant itself contributes some friction to the system because of the way its molecules slip over one another.

Conventional petroleum oils consist of molecules of varying sizes in long carbon chains that don’t easily slip across one another, which contributes to friction and reduces fuel efficiency.

AMSOIL lubes are engineered with uniform, smooth synthetic lubricant molecules that slip across one another easily. That reduces intra-fluid friction, which in turn improves power and fuel economy, because more of the energy released from fuel combustion reaches the wheels and moves the vehicle. The vehicle accelerates more quickly and powerfully because more of the fuel goes to moving the vehicle instead of overcoming friction. The vehicle also works more efficiently which increases fuel economy, or miles per gallon, because more of the fuel goes to moving the vehicle than to overcoming friction.

Furthermore, the various sized molecules in conventional petroleum oils also are sensitive to heat at relatively low temperatures, which changes the oil’s viscosity. Heat causes oils to oxidize, which forms sludge and deposits that cause the oil to thicken and create drag on moving parts. That drag reduces fuel efficiency.

Likewise, heat causes the lighter molecules in petroleum oils to volatize, or “boil off.” Again, this leaves behind a thicker oil, which creates drag on the moving parts and increases fuel consumption.

Again, because AMSOIL synthetic motor oils are engineered with uniform molecules, they are significantly more resistant to the effects of heat and inhibit oxidation and volatization, which means they inhibit thickening and the formation of sludge and deposits that reduce fuel efficiency.

Research indicates synthetic motor oils can increase fuel efficiency by 2 percent to 3 percent. However, anecdotal reports claim even greater fuel efficiency.

AMSOIL synthetic motor oils were the first fully synthetic motor oils on the market in 1972. AMSOIL uses only the very best synthetic base stocks and world-class additive packages formulated specifically for each engine oil and lubricant application.

In fact, certified test results report AMSOIL Synthetic Motor Oil shows an Energy Conservation (EC-Il) pass of the ASTM Sequence VI test for fuel efficiency at 3.72 percent. Minimum standards require an oil to pass by 2.7 percent.

“The 3.72 percent EFEI (Energy Fuel Efficiency Index) represents a 38 percent improvement over the minimum requirement for EC-Il,” according to the ASTM report.

Knowing this; why would you not use Amsoil products?

-         Reduce engine wear by up to 40%

-         Increase fuel economy by 2 % to 3% (or more)

-         Reduce maintenance costs – due to extended drain intervals

-         Reduce waste oil – better for the environment

-         Improved winter starting – due to low pour point

-         Engines runs cooler in high temperature conditions

Call your Amsoil Dealer Direct at (780)476-0545  Ask for Jim.

If you would like more information about AMSOIL INC., Amsoil Products or Amsoil Business Opportunites, click one of the links below:

amzoil oil lube grease gear synthetic lubricant 10-30 10W-30 15-40 15W-40 0-30 0W-30 Amzoil compressor business opportunity synthetic oil environment gasoline additive diesel hydraulic atf ATF transmission transmision wholesale retail commercial Edmonton Alberta edmonton alberta canada Canada USA US U.S.A.

amzoil lube grease gear synthetic lubricant 10-30 10W-30 15-40 15W-40 0-30 0W-30 compressor fleet business opportunity synthetic oil environment gasoline additive diesel hydraulic atf ATF transmission racing transmision wholesale retail commercial Edmonton Alberta edmonton alberta canada Canada USA US U.S.A. low viscosity ATF

racing amzoil lube grease gear synthetic lubricant 10-30 10W-30 15-40 15W-40 0-30 0W-30 compressor fleet business opportunity synthetic environment gasoline additive diesel hydraulic atf ATF transmission transmision wholesale retail commercial Edmonton Alberta edmonton alberta canada Canada USA US U.S.A.
 
 

            

Search the Web