Pleated
Filters
PLEATED CARTRIDGES FOR HIGH FLOW, LONG LIFE, GREATER
SEDIMENT REMOVAL AND REDUCED FILTRATION COSTS.
These filter cartridges out perform other pleated elements
because our high performance filter media is systematically
produced using 100% synthetic fibers, with no binders or
additives to leave a residue foam or contaminate.
SUPERIOR FILTRATION: Cartridges provide superior filtration
by using 100% synthetic filter media with no cellulose,
binders or additives to contaminate.
SPECIFICATIONS:
| Temperature
Range: |
.....40°F
– 140°F (4.5 - 60°C)
|
End
Caps:
|
Plastisol
|
| Media: |
100%
synthetic
|
Packaging:
|
Wrapped
(all)
|
|
Center
Tubes:
|
.....Polypropylene..
........(1 – 1/4” ID).....
|
Flow
Rate:
|
4
– 10 GPM
|
As Per a 10” cartridge based on micron rating, turbidity
and other factors
Maximum Flow Rates Per Cartridge (GPM)
|
MicronRating\Length
|
Standard
Cartridge – ...2 1/2”
OD |
Full-Flow
– 4 1/2” OD
|
| 9¾” |
20” |
10” |
20” |
|
1
Micron
|
4 |
8 |
10 |
15 |
|
5
Micron
|
7 |
14 |
15 |
25 |
|
20
Micron
|
8 |
16 |
15 |
25 |
|
50
Micron
|
10 |
20 |
15 |
25 |
Note: Filter housing selection should
also be considered when flow rate per cartridge is determined.
LOW PRESSURE DROP FOR HIGHER FLOW RATES
Cartridges are pleated, so initial pressure
drop is significantly less compared to depth cartridges,
such as wound, spun, melt blown and resin bonded. Consequently,
higher flow rates are possible, reducing filter housing
size requirements to lower capital equipment costs.
PART NO...............................................DESCRIPTION....................................................................................Price
W-FPLO-2509-9010...............PL 10-01 2-1/2 X 9-7/8 PLEATED 1 - MICRON FILTER
W-FPLO-2509-9050...............PL 10-05 2-1/2 X 9-7/8 PLEATED 5 - MICRON FILTER
W-FPLO-2509-9200...............PL 10-20 2-1/2 X 9-7/8 PLEATED 20 - MICRON FILTER
W-FPLO-2509-9500...............PL 10-50 2-1/2 X 9-7/8 PLEATED 50 - MICRON FILTER
W-FPLB-4509-9010...............PL10B-01 4-1/2 X 9-7/8 PLEATED 1 - MICRON FILTER
W-FPLB-4509-9050...............PL10B-05 4-1/2 X 9-7/8 PLEATED 5 - MICRON FILTER
W-FPLB-4509-9200...............PL10B-20 4-1/2 X 9-7/8 PLEATED 20 - MICRON FILTER
W-FPLB-4509-9500...............PL10B-50 4-1/2 X 9-7/8 PLEATED 50 - MICRON FILTER
W-FPLO-2520-0010...............PL20-01 1 - MICRON PLEATED FILTER
W-FPL0-2520-0050................PL20-05 5 - MICRON PLEATED FILTER
W-FPLO-2520-0200...............PL20-20 20 - MICRON PLEATED FILTER
W-FPLO-2520-0500...............PL20-5 50 - MICRON PLEATED FILTER
W-FPLB-4520-0010...............PL20B-01 1 - MICRON PLEATED FILTER
W-FPLB-4520-0050...............PL20B-05 5 - MICRON PLEATED FILTER
W-FPLB-4520-0200...............PL20B-20 20- MICRON 4.5” PLEATED FILTER
W-FPLB-4520-0500...............PL20B-50 50- MICRON 4.5” PLEATED FILTER
|
Main
