Unimog Project Page 9
Unimog Project Page 9
Well I've been working on the other side fitting the side panels. Thought I'd take a pic of the Gas Filler. It's a boat fitting made of Polished Stainless Steel I picked up from a Marine supply store. Should do the trick and was fairly cheap ($35 US). I still have to pick up some Stainless screws to fasten it down. (9/9/2004)
Picked up a 5 Gal. Air Tank and mounted it. The original mounting brackets were on the bottom so I cut them off and welded them onto the top side so it could hang under the box.
A second shot looking down from the top.
Another shot with the Air chucks installed (9/19/2004)
Another shot of the Fuel Filler with the mounting bolts installed.
Here is a shot of the Rear Deck all fastened down. Quite time consuming to weld in all of the bracing underneath, complete with nuts welded to the bottom so I can just bolt it down from the top. Seems like even though I marked them from underneath 25% of the holes didn't line up well so had to be adjusted.
.