topbanner.jpg (19460 bytes)
AMSOIL Synthetic Multi-Purpose Grease

Synthetic GL Series Multi-Purpose EP Grease

Reduces friction and wear in high-speed/high-temperature components such as automotive wheel bearings and electric motors. It keeps components running clean and trouble-free for outstanding performance and long life. Product Codes: GLA, GLB, GLC

To request a free product catalog.
For Pricing or to order call Toll Free 
1-800-956-5695
Use your Customer # 327600

Also available:

Synthetic Multi-Purpose Spray Grease

The same great AMSOIL Synthetic Multi-Purpose Grease in a convenient spray formulation. Ideal for greasing hard-to-reach equipment such as hinges, springs and many other common applications.


"Before using AMSOIL, two of our race cars were suffering wheel bearing seizure on a regular basis. This year, using AMSOIL Wheel Bearing Grease, our problems stopped totally."
H.C., Houston, Texas

Product Applications or Requirements

PRODUCT DESCRIPTION

AMSOIL GL Series multi-purpose, EP greases are qualified against the highest grease standards*, NLGI GC (wheel bearing) and LB (chassis), and are designed for multiple use applications. These greases are composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GL Greases are compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

AMSOIL’s top performing lithium complex thickener system provides excellent adhesion properties and water resistance as identified by ASTM D-1264 water washout test. This resistance to water means a protective film of lubricant remains present to protect equipment against wear while the corrosion inhibitors prevent rust. AMSOIL GL Greases adhere to metal in all types of environments and they resist squeeze out during operation. These qualities ensure maximum lubricant protection during harsh operations.

AMSOIL GL multi-purpose greases are recommended for many different applications. Its diversity simplifies lubricant inventories and prevents greasing errors while providing problem-free operation. AMSOIL GL Greases reduce repair and maintenance costs.

PERFORMANCE FEATURES

* Applicable only to NLGI Consistency Grades #1 and #2

APPLICATION RECOMMENDATION

AMSOIL GL Greases grades #0, #1 and #2, are recommended for use in manual or automatic lubricating systems. NLGI #0 (GLA) and #1 (GLB) have better mobility and are the preferred choice for colder applications. for automatic lubrication systems with long pumping runs. and for gear box applications (where recommended by manufacturer). NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments. and is the primary choice for wheel bearings.

The correct consistency grade of AMSOIL GL multi-purpose greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL GL greases are suitable for use up to 350 F When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL GL Lithium Complex Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

APPLICATION MAINTENANCE

Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.

Typical Technical Properties


Typical Technical Properties
Revised 6/01
Synthetic GL Series Grease GLA GLB GLC NLGI GC/LB
Thickener lithium complex lithium complex lithium complex NR
Fortified with moly compound no no no NR
NLGI consistency grade 0 1 2 NR
NLGI performance grade NA GC-LB GC-LB NR
Penetration - ASTM D 217 (25°C [77°F], 0.1 mm) worked 60 strokes 355-385 310-340 265-295 220-340 min
Dropping point, °F[°C] - ASTM D2265 430[221] 500[260] 550[288] 428[220] min
High temperature life, hours - ASTM D 3527 120 140 160 80 min
Oxidation stability, psi - ASTM D 942 (100 hr/300 hr) 1/5 0/5 0/3 NR
Water washout, percent - ASTM D 1264 16.7 5.8 1.6 15 max
Rust and corrosion - ASTM D 1743 pass pass pass pass
Oil separation, percent loss - ASTM D 1742 (24 hours, 25°C [77°F] 5.2 3.4 1.1 6.0 max
Leakage, g lost - ASTM D 4290 NA 7.8 1.0 10 max
Four ball wear test, mm scar - ASTM D 2266 0.45 0.43 0.40 0.60 max
Fretting wear, mg - ASTM D 4170 NA 3.5 3.4 10 max
Four ball EP, kgf - ASTM D 2596

Weld point

Load wear index

  

315

47

  

315

49

  

400

50

  

200 min

30 min
Timken OK load test, lbs - ASTM D 2509 45 45 50 NR
Low temperature torque, N*m - ASTM D 4693 (-40°C [-40°F]) 0.46 0.50 1.3 15.5 max
LT-37 pumpability, g/min (60°F/0°F [16°C/-18°C]) 1475/73 855/29 360/7 NR
Copper corrosion - ASTM D 4048 1B 1B 1B NR
Disc brake wheel bearing specifications

Ford ESA-M1C 198A

Chrysler MS-3701

  

 

NA

NA

  

 

NA

NA

  

 

yes

yes

  

 

NR

NR
Oil viscosity:

40°C [104°F], cSt

100°C [212°F], cSt

  

151

19.2

  

151

19.2

  

151

19.2

  

NR

NR
Flash point, °F[°C] - ASTM 92 450[232] 450[232] 450[232] NR
Color red red red NR
Texture smooth smooth smooth NR
         
NA: Not applicable
NR: Not required for NLGI GC-LB labeling

AMSOIL PRODUCT WARRANTY

AMSOIL Lubricants are formulated to meet or exceed accepted industry specifications. AMSOI L warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL products are used in full compliance with the company's recommendations. However, the purchaser of these lubricants is responsible for determining if these specifications are adequate and proper for the intended application. The AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No additional warranty, expressed or implied, can be made.

AMSOIL PRODUCT AVAILABILITY

AMSOIL GL Series Greases are available in 14-oz. cartridges, 16-oz. tubs (GLC only), 35-lb. pails, 120-lb. kegs and 400-lb. drums.

AMSOIL Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands.

E-mail direct to Amsoil Dealer

Other Trusted Amsoil Websites:
AMSOIL - Your complete source for Amsoil Synthetic Oil
AMSOIL - On-Line Ordering
AMSOIL - Information about becoming an Amsoil Dealer
AMSOIL - Contact Information
AMSOIL - Helps take the bite out of high fuel prices
AMSOIL - Advantage of using Amsoil Synthetic Oil
AMSOIL - Independent Amsoil Dealer
AMSOIL - Reduce dependence on foreign oil
AMSOIL - Advanced technology for maximum performance


Other Links of Interest
Selkirk Truss - Engineered Floors & Roof Truss Systems
ThistleDee Kennels - Keeshond Breeders
C-Write - Learning tools for students from Grades 7-12